Tool Hire Directory

Compact Floor Grinder Hire - Hire

Hire an electric compact floor grinder from Brandon Tool Hire for removing floor paints, rubber adhesives, carpet backing, carpet glue and bitumens.

More details

Add to Hire Reservation

The compact floor grinder is a heavy duty floor grinder with 230mm diamond plates and flexible drive coupling. It is fitted with a robust 1.5kw motor that runs at 20 amps on 110 volt.
The design is simple and the machine is easy to set up, use and maintain and is available with a range of grinding plates, segments and abrasives for levelling and prepping floor surfaces and coatings, grinding hard floors including concrete, epoxy and terrazzo.
Also ideal for surface preparation prior to the application of epoxy coatings and floor paints.
It will effectively remove rubber deposits, adhesives, bituminous coatings and impacted dirt from factory floors. A profiled surface is left that provides a suitable key for resurfacing if used with coarse grit diamonds
The 110 volt model is fitted with a 32 amp plug and needs to run off a 5kva transformer

*Additional charges apply for the diamond grinding heads

• for grinding off concrete & laitance
• prepping epoxy & latex
• smoothing out trowel marks
• resurfacing old concrete & slabs
• taking off concrete surface laitance
• stripping floor coatings & paints
• removing membranes & hardeners
• renovating & maintaining factory floors
• finishing & levelling terrazzo
• taking off adhesives & sealers
• levelling & removing latex

Technical specification

  • Speed1400rpm
  • Weight42kg
  • Size WxL42x84cm
  • Height105cm
  • Disc230mm
  • Prep rate40m/hr
  • Vibration level 6.5m/s
  • Noise level79dBA
  • Voltage110v 
  • Transformer5kva, 32 amp plug


Diamond Grinding Heads

The bolt on mini plates are available with a wide range of segment types, bonds and diamond grits, extending the variety of floors and surfaces that the PD23 can successfully grind, level, prep, finish and polish.

The blue mini-plates are for grinding and reducing concrete and are available in abrasive sizes down to 250 grit and are suitable for smoothing and finishing concrete.

The silver mini plates are for removing surface coatings and toppings including epoxy paints, adhesive residues and latex.

The new PCD polycrystalline diamond segments are high tech abrasive tools for reducing and removing floor toppings and difficult to remove coatings and adhesives, black jack and bitumens, latex, cement toppings and epoxy. The PCD discs are cost effectiveto use because of their long life on toppings and coatings. The coarse grit plates are for floor paint and coating removal; they will effectively remove rubber deposits, glass fibre and impacted dirt from factory floors


• diamond abrasive mini plates

• for grinding off concrete surfaces & contaminants

• removing membranes & hardeners

• latex & cement based adhesives

• epoxy paints & finishes

• adhesive residues & black jack

• bitumens & waterproofers

Customer Callback

If you would like advice on choosing the right tools and equipment, please leave your details and we will call you back:

Brandon Hire Limited
Registered Office: 72-75 Feeder Road, St Philips, Bristol BS2 0TQ
Registered England 1008351 | VAT Number 997 3209 73