Compact Floor Grinder - Hire

The compact floor grinder is a heavy duty floor grinder with 230mm diamond plates and flexible drive coupling. It is fitted with a robust 1.5kw motor that runs at 20 amps on 110 volt.

The design is simple and the machine is easy to set up, use and maintain and is available with a range of grinding plates, segments and abrasives for levelling and prepping floor surfaces and coatings, grinding hard floors including concrete, epoxy and terrazzo.

Also ideal for surface preparation prior to the application of epoxy coatings and floor paints.
It will effectively remove rubber deposits, adhesives, bituminous coatings and impacted dirt from factory
floors. A profiled surface is left that provides a suitable key for resurfacing if used with coarse grit diamonds
The 110 volt model is fitted with a 32 amp plug and needs to run off a 5kva transformer

*Additional charges apply for the diamond grinding heads

APPLICATIONS
• for grinding off concrete & laitance
• prepping epoxy & latex
• smoothing out trowel marks
• resurfacing old concrete & slabs
• taking off concrete surface laitance
• stripping floor coatings & paints
• removing membranes & hardeners
• renovating & maintaining factory floors
• finishing & levelling terrazzo
• taking off adhesives & sealers
• levelling & removing latex

Technical specification

• Speed 1400rpm
• Weight 42kg
• Size WxL 42x84cm
• Height 105cm
• Disc 230mm
• Prep rate 40m/hr
• Vibration level 6.5m/s
• Noise level 79dBA
• Voltage 110v or 230v
• Transformer 5kva, 32 amp plug